There you are a Techie. Is DIY a hobby for you? You’re a novice in 3d printing? Then the 113860 Monoprice Builder Pick 118360 is the correct option to start purchasing.
It is currently one of the most inexpensive entry-level 3d printers available on the market. The Monoprice 113860 Creator Select is a concept clone of Josef Prusa.
This product is manufactured by Wanhao of China and monoprice.com sells this in the retail market.
The Monoprice Builder Pick 3D Printer is the best starting option for your needs if you’re ready to move your ideas and designs from a paper or CAD file to the next level! Unlike kit-based printers, which need some amount of expertise, experience and assembly time.
Before we dig a little further, you might say to yourself that the Monoprice Builder Pick Plus looks uncannily like a couple of other 3D printers on the market today.
And you’d be right. The Monoprice Maker Select Plus is a Wanhao i3 Plus 3D printer white label rebadged (and shares many features with the Anycubic i3 Mega). They look the same, print the same and they are the same, except for the logo on the branding and boot panel.
Development on the Monoprice Maker Select V2, the Maker Select Plus takes its predecessor’s external control box and incorporates it under the print pad. The effect is a 3D printer which is equally effective within about half of the footprint
We are going to give you a detailed review of its key features and the pros and cons below:
In addition to ABS, PLA, the Maker Select works with many filaments. The models can be printed with XT copolyester, PET, TPU, TPC FPE, PVA, HIPS, Jelly, Foam, and Felty. It uses the normal filament size of 1.75 mm, which can accommodate up to 1 kg of the spool.
If you want to print Nylon filament items, you have to buy all the high-end metal packages. When you buy this kit, you will receive a sample filament of random color.
But this is low in volume (10m/32 ft) and does not last long. After you buy the unit, remember to order the filament of your choosing in advance.
So that as soon as you receive your order you get going. Such filaments are cheaper on various internet retailers such as Amazon.
Build Volume description:
One of the main features of this machine is the ability to print large sample size prints.
Monoprice prides itself on printing as high as 8′′ x 8′′ x 7′′. Compared with many other candidates in this price point segment, this value is larger.
The Maker Select v2 has a large amount of construction which means you’re not limited to small pieces. Its full construction volume will be sufficient enough for the long haul until you want to move on to more exciting projects.
However, the build volume may be expanded but that would require a lot of work. For one it is important to remove or expand the Z-axis
Maker Select comes complete with a metal case. Compared with other acrylic frames this kind of frame is solid.It has an open framework which makes improvements simple to complement – a required feature if you want to make the most of your 3D printer.
This new model has a more robust structure compared to the original Makers select and comes with better components.
Housed in a solid aluminum case, this 3D printer is supported by a separate control box that converts into a wider footprint so make sure you have enough room for it on the desktop.
The bulky control box has a knob-operated LCD interface that displays multiple statistics, such as print progress and heating component temperature.
The Maker Select Plus takes its predecessor’s exterior control box and installs it under the print pad.
The effect is a 3D printer which is equally effective within about half of the footprint. Monoprice Pick comes with an LCD display, so the device can be easily navigated and controlled.
Apart from the 110V/220V switch, the USB and SD card slots are also located on the control box. Instead of being all over the place as seen on many Prusa-based 3D printers, the cables are well controlled, preventing them from making contact with moving parts when the system is printing, which may result in malfunctions.
The Maker Select v2 and the Duplicator i3 are identical in appearance. Yet there is one distinction which is hard to miss: the spool holder’s position.
In the case of the Maker Select v2, instead of on the control box, the spool holder is placed at the top of the container.
This frame-mounted spool holder configuration makes the Maker Select v2 more in line with the same design as the Original Prusa i3 MK2.
Setup and Calibration:
Monoprice offers step-by-step initialization guidance for the user guide. To assemble this package and attach the cables you only need to replace the 6 screws.
Calibration is simple if you can level the print bed but for certain consumers, it may be difficult. You need some flexibility and direct the manuals to online videos to calibrate them in the correct place.
The Maker Select v2 is neither a DIY kit nor a full 3D printer. It comes in a semi-assembled kit, with most protected pieces already in place. Putting it together is a simple operation, even with the mediocre instruction manual.
The first thing you can do before you step into the assembly process is to test all the pieces.
Check for any loose screws or twisted places at each corner. Monoprice is notorious for, or lack of, its quality control. Customers have reported units coming out of the box with broken or defective parts.Moving forward, there are three simple steps to the initial configuration.
Next, the Z-axis frame and the print bed frame need to be attached together to protect the system with the screws contained in the packet.
Second, you will link the cables to their respective positions.
All are numbered correctly and it is difficult to screw up with the cable links unless you pay no attention to the marks. And sixth, the spool holder has to be mounted at the top of the frame.
This is it. There is simply no need to weld anything. The entire assembly will only take one or two hours to complete. Anything you need to bring this 3D printer together is in the box. Some people would choose to build a 3D printer from scratch to learn about the machine’s internal mechanics.
But not everyone has the time or ability to manage DIY packages, which, as described above, can only take a whole day for assembly, not including calibration.
Yet while this 3D printer’s assembly process is fairly straightforward, all of the initial configurations aren’t all roses. For example, take the process of leveling the beds. For newcomers, this can be a daunting experience. It might also be a pain in the butt for veterans.
The Builder Pick v2 has a method of leveling the beds manually.
It does not have a bed leveling assist included in the GUI to make the operation simpler – close to the one used on the Sindoh 3DWOX DP200. The positive thing is that the internet has tutorials telling you how to get things done.
Mononprice supports Windows, Mac OS X, and Linux. Without issues, it supports Windows 10. Monoprice uses open-source printing services.
A very nice interface. You can also slice use Fix, Repeater or Simplify 3D. Monoprice supports file format with.gcode. If you are using Autocad or any other similar programs, create.
STL file and export it.
Heated up Base:
Maker Select comes with a heated bunk.
That means you can print ABS filament to slower cooling artifacts. The heated bed can be temperate to up to 260 C.
This 3D printer comes with a heated printing pad, which ensures you can print with ABS, Nylon, and other high-temperature materials – but not without improvements in several locations, like the extruder.
- You will get these accessories along with your order when you put the order-
- Control box along with a heated bed and an extruder tower
- A spool holder with a stand
- A wrench
- A 2 GB micro SD card along with some sample models
- 6 Hex bolts will also be there
- A scraper
- A sample filament of any random color
- Few print bed mats
- Power Cords along with a USB cable.
It has a large build-up space.
It has a strong Metal body.
It comes with a heated bed.
It has an Open Source Software.
It comes within an affordable price.
In comparison with other contenders, its speed is slower.
Customer support delays in solving related issues.
It might take quite a bit of effort to have the initial prints.
Customer reviews for Maker Select 113860:
Maker Select customers 113860 are positive about their ratings. They shared their happiness about the print quality and its inexpensive price.
Typically customers who left low ratings had individual issues after obtaining their products. Some of them are not happy with the staff providing customer support. The average score is 4 points.
It’s a popular 3D printer for anyone able to invest in improvements and waste a great deal of time on tinkering. It can generate a few good prints with its default configuration but it needs to make lots of changes and modifications with an order for it to shine and be a consistent workhorse.
If it sounds like your teacup then this 3D printer is for you.
Maker Select 113860 Price:
Maker Select is incredibly good value for money. You can expect the Monoprice 113860 to deliver quality performance and ease of use.
Recently, its price has been lowering further, and its great deal at this price. Since this computer is based on Prusa i3 architecture, you don’t need to think about the replacement parts or selling them.
If you are on a tight budget or are a newcomer to 3d printing we suggest this product. And if you don’t know about the 3d architecture, this isn’t a question at all. And That’s it for Monoprice 113860 Maker Select 3D Printer Review!